Adds an 1/8in NPT thread for a typical fuel pressure gauge. Fits both 5/16inch and 3/8inch hose. Use with Banjo Spacer (9086K) for safe clearance on progressive linkages.
Part No. 9082K-G
All the benefits of our super-popular single-end banjo fitting, but with an 1/8th NPT hole in the end of the banjo bolt to accept your hot rod fuel pressure gauge. All the more important with Stromberg 97 carburetors because you need to ensure 2.5psi max. They’re sized to fit both 5/16inch and 3/8inch hose, with plenty of fuel flow guaranteed. On Ford flathead applications, check for gauge clearance on your top radiator hoses. Note: To provide safe clearance with a 3×2 progressive linkage, banjo fittings must be used with our stainless banjo spacers (9086K). Will not provide clearance for progressive linkages on 6×2 systems. All direct linkages clear OK without spacers.
5/16 inch OD hard fuel line can be used on your 97 or BIG97, BUT you need the right Ford nut compression fitting ( 9581K-BIG ) and the 9564K-BIG Stromberg S-jet inlet valve. BIG97s already have the BIG S-jet. Read on!