Linkage parts  

Stromberg levers, rod ends & more.
To order, you can add products to your Wishlist, then email it to a dealer:
$8.95
Stromberg-97 - Linkage parts - 9090KStromberg-97 - Linkage parts - 9090K
9090K

SuperLink lever 

A new take on the traditional multi-carb linkage arm - a zinc die-cast with a modern H-beam section for strength without excess weight.
$15.95
Stromberg-97 - Linkage parts - 9091KStromberg-97 - Linkage parts - 9091K
9091K

SuperLink lever with swivel 

Our 9090K lever with a stainless steel swivel, secured by a small e-clip on the back, and a cross hole sized for the typical 3/16th diameter linkage rod, secured by a black knurled-tip set screw.
$19.95
Stromberg-97 - Linkage parts - 9096KStromberg-97 - Linkage parts - 9096K
9096K

Long lever with swivel 

Designed to match the shorter Superlink lever arms, this longer version also comes with a swivel and clamping screws (click more for further details).
$19.95
Stromberg-97 - Linkage parts - 9096K-KDStromberg-97 - Linkage parts - 9096K-KD
9096K-KD

Long lever with kickdown arm 

Our 9096K long lever with additional auto-trans kickdown capability - a 1/4"-UNF thread at the bottom end takes a Lokar-style kickdown cable end (click more for further details).
$39.95
Stromberg-97 - Linkage parts - 9136KStromberg-97 - Linkage parts - 9136K
9136K

Cable Throttle Bracket 

Securely mounted between the carburetor and intake manifold, our Cable Throttle Bracket positions the cable for optimum, bind-free ‘pull’ on Stromberg TwoStep linkages.
 
9139KThrottle Shaft Extension Kit
  • Extends the 97 throttle shaft 3-3/4” for difficult linkage applications
  • Stainless steel construction resists twist
  • Support bracket ensures reliable linkage movement
  • PTFE-lined support bush for smooth throttle action
  • Perfect for Weiand WC4D (small block Chevy) & Edelbrock CD-694 (early Cadillac) intakes. Blower plates too!
  • Detailed instructions available at the Stromberg Tech Center
9139K - Throttle Shaft Extension Kit9139K - Throttle Shaft Extension Kit9139K - Throttle Shaft Extension Kit9139K - Throttle Shaft Extension Kit
More Details
Extending the Stromberg 97 throttle shaft for difficult linkage applications, this kit comes with a support bracket for reliable linkage operation. It's designed for narrow spaced 4x2 and 6x2 intakes where all of the carburetors must be linked on one side - like the Weiand WC4D, Edelbrock CD-694 and supercharger adapter plates.

To resist twisting in operation (common with brass shafts), Stromberg extensions are high-grade stainless steel, with a larger diameter section extending as far up the shaft as possible. For improved looks, it covers the 97 throttle shaft bush. And for maximum security and alignment, it is fixed with a 3/32” roll pin (supplied) through the hand throttle mounting hole, standard on every 97 throttle shaft.

The new shaft extension is long enough for up to 3-3/4” carb offset across the engine. And the stainless steel ‘trim-to-fit’ support bracket, with its PTFE-lined bush for smooth operation, accommodates up to 4-1/8” in-line offset between the two banks of carburetors – enough for all ‘known’ applications. Naturally, the kit works perfectly with other parts from the Genuine Stromberg range, allowing customers to complete their linkage with matching parts.

Each kit comes with ‘quick-fit’ help in the pack, and full and detailed installation instructions are available via the Stromberg Tech Center at www.stromberg-97.com .
$9.95
Stromberg-97 - Linkage parts - 9154KStromberg-97 - Linkage parts - 9154K
9154K

Snapback return spring (x2) 

Our new stainless steel 'Snapback’ throttle return springs wrap around the end of the Stromberg throttle shaft and hook onto your linkage lever arm to snap your carburetors shut.
$15.95
Stromberg-97 - Linkage parts - 9164K-LStromberg-97 - Linkage parts - 9164K-L
9164K-L

Linkage bomb (Left Hand 10-32 thread) 

Build your own pedal to carb rod with these cool stainless steel linkage clips, which fix onto the Stromberg throttle shaft and an early Ford firewall pedal linkage.
$15.95
Stromberg-97 - Linkage parts - 9164K-RStromberg-97 - Linkage parts - 9164K-R
9164K-R

Linkage bomb (Right Hand 10-32 thread) 

Build your own pedal to carb rod with these cool stainless steel linkage clips, which fix onto the Stromberg throttle shaft and an early Ford firewall pedal linkage.
$15.95
Stromberg-97 - Linkage parts - 9166KStromberg-97 - Linkage parts - 9166K
9166K

Rocket clip 

Upgrade your throttle cable with the coolest end clip around! With its stainless steel body and black painted clip, the Stromberg Rocket Clip works with all popular throttle cable kits.
$15.95
Stromberg-97 - Linkage parts - 9168KStromberg-97 - Linkage parts - 9168K
9168K

Linkage Ball x 2 

Two handy threaded linkage ball studs with 7mm (0.275in) diameter balls, the same as Stromberg choke and throttle ball connections - Half an inch of thread - Nuts included - Fits Stromberg Linkage Bombs (9164K-R and 9164K-L) and Rocket Clip (9166K).
Not found what you wanted? Click on another tab
View your WishlistWhat is a WishlistEmail a link to this page to a friendPrint this page
Warranty  Contact us  Privacy  Terms & Conditions