3×2 Progressive Linkage. Chrome. 4-7/8in carb spacing with kickdown

Overview

Fits Offenhauser 3x2 intakes for early overhead valve engines, like Ford Y-block and '49-'61 Cadillac, but check carb spacing before ordering

Use two of these kits with 9261-BB Back-bar for 6x2 Edelbrock X1 Ram intake

Extended center lever with auto-trans kickdown capability

To use with banjo fittings, add 9086K spacers

Show chrome/polished stainless steel finish

Extended throttle shafts not required

Part No. 9251PRO-KD-CHR

$209.95

Updating Wishlist
209.95

  $

3×2 Progressive Linkage. Chrome. 4-7/8in carb spacing with kickdown

A premium 3×2 progressive carburetor linkage designed for optimum performance and versatility. Use on intakes with 4-7/8in carb spacing. If in doubt, simply measure your manifold spacing – throttle shaft to throttle shaft.

Exclusive to Stromberg Speed Parts, this linkage features our ‘Snapback’ throttle return springs which virtually disappear from view. Special swivels and bolts clamp the rod ends tight, yet still allow full rotation. The small bolt has a blind hole, allowing you to insert eg, a hex key, to tighten the lock nut.

The extended center lever has a 1⁄4”UNF thread, which accepts the special fixing common to most (eg ‘Lokar®’) hot rod auto-trans kickdown cable kits. Stromberg KD linkages are designed to work with the Stromberg Cable Throttle Bracket (9136K).

The tapered rod stops are fully adjustable, with discreet set screw fixings and opposite threaded rod ends ensure easy adjustment. Just spin the secondary link rod to adjust for the correct lever angles.

The linkage comes pre-assembled, installs in just two simple steps and comes with full instructions. Click the other tabs for help with installation and tuning.

WARNING! To use this linkage with banjo fuel fittings, you must add our 9086K banjo fitting spacers to ensure safe clearance between the long lever and the fuel line. Always read the instructions before installation.

WARNING! Always check that your vehicle’s automatic transmission and kickdown cable are compatible with the Stromberg KD linkage. Different transmissions have specific kickdown requirements and incorrect set-up can result in transmission damage.

Tech Center

Connecting your KD linkage

Important information on installing Stromberg TwoStep progressive KD linkages with additional automatic transmission kickdown capability. Please read this in conjunction with the full Stromberg Linkage Installation Guide, also on our Tech Center. And check out our 9136K cable throttle brackets, too.

Tuning the 3×2 Progressive linkage

So you’ve got your Stromberg TwoStep 3x2 progressive linkage. Here’s how to make the best use of it. Primary and secondary carbs, banjos, fuel pumps, push or pull? There’s a lot to learn.

Literature

TwoStep Linkage Installation Guide

TwoStep, linkage, installation, guide, download, Owner’s, manual, instructions, 3×2, 2×2

Download PDF