Stromberg 97 Black

Overview

  • Black lacquer finish with chrome/polish details
  • Built to original Stromberg blueprint specification, with key improvements
  • Correct cast iron base
  • Black lacquer finish with chrome/polish details
  • Factory-set brass float, made in the USA on original dies
  • Reinforced airhorn lid eliminates leaks
  • Twin-ball S-jet inlet valve
  • High tech cellulose/nitrile gaskets
  • 162cfm out of the box
  • Cable choke, LZ linkage and/or Vacuum Port options available to special order

Part No. 9510A-BLK

$525.00

Updating Wishlist
525.00

  $

Stromberg 97 Black

They’re just the same. But better than ever. A brand new genuine Stromberg 97 in black and chrome finish. Available only from Stromberg Speed Parts.

Here are the highlights:

  • Castings painted with black lacquer before assembly. Chromed brass plugs, screws and S-jet, and polished stainless steel linkage and springs.
  • Super-accurate pressure die-castings from new dies, CNC-machined for a blue-print parts fit. So no oversize screw threads. No mystery parts from previous rebuilds. No problems.
  • An early style cast iron base with stock size – not second-best oversize – throttle shaft. Parkerized and black lacquered just like they used to be.
  • A reinforced air horn casting with extra material around the float bowl lid to eliminate warping and leaks.
  • Stock original (sea level) Stromberg jetting – 0.045 main jets and a Number 65 power valve.
  • 162cfm out of the box (independently verified) measured at 1.5inch Hg (same as they measure 4-bbl carbs).
  • A new brass float, made in USA on original Stromberg dies.
  • A specially developed no-stick S-Jet inlet valve.
  • Modern, high-tech, reinforced gaskets. Sorry, no leaks.
  • Stainless steel linkage throughout. Who needs rust? Not us. Our springs are stainless. So is the accelerator pump rod, the throttle linkage, choke plate, lever and more.
  • Beautiful polished investment cast stainless steel throttle and accelerator pump levers.
  • Original-style riveted throttle and choke shafts.
  • Extensive dyno and road tests have proved that it matches or exceeds original spec.
  • Available with cable choke and/or LZ linkage options to special order.

Note: Original hand throttle parts are not included. If you need them, email us, as we can probably find you good used parts.

Remember, like any carburetor, the Genuine Stromberg 97 needs proper installation and tuning for optimum performance. Every 97 comes with full installation instructions and we are working on help with tuning in our Tech Center.

 

Tech Center

Will the new 97 fit my car?

Thinking about a 97? Here are some notes about your manifold stud pattern, carburetor spacing, air cleaner and hood clearance, linkage, choke, fuel lines, distributor vacuum, cfm and more.

HOW TO: Install 9447K Full gasket kit

How to take your Stromberg 97, BIG97, 48, 81 or LZ apart for cleaning, then install our 9447K gasket kit.  

HOW TO: Install 9533K Main jets

9533K, main jets, install, remove, swap, tune, 

HOW TO: Install 9594K Power valve

9594K, power valve, install, 9594K-65

HOW TO: Install 69447K manifold gasket 6-pack

How to use our 69447K kit to install or replace your manifold to carburetor gaskets.

Literature

Stromberg 97 Owner’s Manual

97, carburetor, manual, instructions, guide, install, installation, literature, download, 

Download PDF

Video