Looking for Genuine Stromberg service parts? We've got 'em.  Genuine Stromberg carbs and parts are designed and manufactured to the best available quality. They're great value, too. Always look for the Genuine Stromberg stamp on every part.

Genuine Stromberg service parts have been available for over two years now and everyone's been knocked out by our quality and attention to detail. We know this because they tell us. We also stand behind all our products with a full 12 month warranty. Click on Dealer Network for details of Genuine Stromberg parts stockists. If you don't want to fit your own service parts, almost all our dealers offer carburetor rebuild facilities.

Choose your kit
To best match your needs and make ordering easy, we've combined our parts into convenient kits - all at very competitive prices – and split the list between regular service and restoration parts. Most parts also fit Stromberg 40, 48 and 81 carburetors too. Here's the full list of parts available for immediate delivery. To order, call a Stromberg dealer or email us at sales@stromberg-97.com

SERVICE PARTS
Number		Part	Recommended Retail Price
9590K-97		Premium Service Kit kit for Stromberg 97, 48 and 40 - Full gasket kit, ‘No-stick’ S-jet inlet valve, Accelerator pump check valve, 2 idle mixture screws and springs, Full accelerator pump kit, Installation sheet and float gauge (over US$65 retail value)	$45.95
9590K-81		Get ‘em here! Premium Service Kit for Stromberg 81 - Full gasket kit, ‘No-stick’ S-jet inlet valve, Accelerator pump check valve, 2 idle mixture screws and springs, full 81-size accelerator pump kit, installation sheet and float gauge	$49.95
9447K		Full gasket kit - three main gaskets (non-paper), plus felt gasket for accelerator pump, and ring gaskets for power jet, inlet valve and drain plugs	$10.95
9447K-5		Bulk gasket kit – as above x 5	$45.95
69447K		Carb to manifold gasket pack. 6 gaskets	$11.95
9526K-97		Accelerator pump rod for 97 and 81 - stainless steel	$19.95
9526K-48		Accelerator pump rod for 40 and 48 - stainless steel	$19.95
9533K-size		Main jets - pair  - all sizes available	$9.95
9534K		Emulsion tubes - pair	$22.95
9541K		Idle adjusting screws & springs - pair	$12.95
9542K		Idle jets - pair	$16.95
9558K		Float pin	$5.95
9563K		Bowl plug gaskets (pack of 10)	$4.95
9564K		Fuel inlet S-jet with gasket	$16.95
9573K		Accelerator pump check valve	$5.95
9586K		Throttle/choke plate screw kit - pack of 10	$5.95
9594K-size		Power by-pass jet with gasket - all sizes available	$12.95
9630K		Accelerator pump kit inc. springs/retainers/washers/felt gasket/cotter pin	$19.95
9630K-81		Accelerator pump kit for the Stromberg 81. Talk about original. Our 81 pump has a correct 10-finger brass spring washer beneath a leather seal. Kit includes two springs/retainer/washers/felt gasket – even a cotter pin	$25.95
9631K		Accelerator pump - stainless steel rod	$9.95
9631K-81		Accelerator pump for the Stromberg 81. What a beauty - with correct 10-finger brass spring washer beneath a leather seal.	$15.95
RESTORATION PARTS
Number		Part	Recommended Retail Price
9522K		Bowl plug kit - all 3 plugs with gaskets	$19.95
9523K		Bowl gallery plugs (pack of 20)	$9.95
9531K		Accelerator pump lever, spring & cotter pin - stainless steel	$19.95
9537K		Choke lever detent plunger & spring - stainless steel	$5.95
9537K-L		Choke lock detent kit. Most Strombergs – even in multiples - run better with the choke plates in. But who needs rattling levers? Lock them open with this clever detent plunger – install into the airhorn as per the stock item, but press the pin end into your choke lever	$6.95
9546K		Choke shaft kit inc. lever, washer, screw & end stud	$18.95
9549K		Choke plate kit inc. screws - stainless steel plate with correct 15 deg edge	$12.95
9550K		Stromberg Superfloat™ with new float pin	$21.95
9552K		Choke kicker assembly (stainless steel) inc. idle screw & spring	$35.95
9552K-C		A perfect replica - in stainless - of the late model 97 choke kicker assembly for cable choke (designed for '49-on Fords). A separate bracket - included - mounts off the rear body screw to hold the cable sleeve.	$49.95
9571K		Spring kit - all exterior springs - all stainless except idle adjuster springs	$18.95
9577K		Accelerator pump discharge jet plus collar - pair	$19.95
9581K		Throttle shaft and lever kit inc. screws & bushes - stock size	$35.95
9585K		Throttle plate - 7 degree edge - pair	$13.95
9589K		Throttle stop screw & spring - stainless steel	$5.95
9592K		Choke & accelerator pump lever fulcrum screws both stainless steel	$11.95
29447K		Carb blank off plate. Want to keep a carb or two out of action? Slip this thin stainless plate between the carb and gasket. It's shaped to fit the later 1-1 base footprint you find on most '50's and '60's 2-bbl manifolds, but it's smaller so it all but disappears	$12.95
31095K		Body screw kit - 8 screws/washers - stainless steel	$10.95
89067K-3		Manifold stud kit. 3 studs with stainless lock washers and nuts	$12.95
89067K-4		Manifold stud kit. 4 studs with stainless lock washers and nuts	$16.95